Go Back   CMP Forums > Welcome Center > New Member Section
Register FAQ Members List Calendar Mark Forums Read

Reply
 
Thread Tools Display Modes
  #1  
Old 08-11-2022, 04:18 PM
Jar Head Joe Jar Head Joe is offline
 
Join Date: Aug 2022
Posts: 2
Default New rack grade member - question on break down and cleaning

Hello forum. I just received my rack grade 1911A1 and the first thing I did was read the enclosed manual and broke it down step by step for a good cleaning with CLP, and to inspect all the parts. I was in the Marines and familiar with breaking down and cleaning the M16A2, along with a handful of other privately owned pistols and rifles. While it was fun breaking it down, I've never broke a pistol down this far for cleaning, and I can't foresee doing this every time I shoot it (e.g., the trigger assembly, the mainspring housing and lanyard, the sear assembly, etc.). Does anyone have a USMC guide to field stripping and cleaning? We have a different way of doing things than the Army.
Reply With Quote
  #2  
Old 08-12-2022, 06:45 PM
epm729 epm729 is offline
 
Join Date: Oct 2009
Location: Highland, New York
Posts: 2,956
Default

Thank you for your service Marine. Most of us only disassemble our 1911s to basic field strip. Slide, barrel, recoil spring and frame. Full disassembly only after many rounds or once a year. Eddie
Reply With Quote
  #3  
Old 08-13-2022, 06:47 PM
Jar Head Joe Jar Head Joe is offline
 
Join Date: Aug 2022
Posts: 2
Default

Thanks Eddie. I finally got to shoot her today. I found my Marine handbook that has a chapter on the M9 which basically breaks it down like you said; slide, reveiver, barrel, spring, and guide rod. This is consistent with my other pistols as well.
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off



All times are GMT -5. The time now is 10:21 PM.