Go Back   CMP Forums > CMP Sales > Auction
Register FAQ Members List Calendar Mark Forums Read

Thread Tools Display Modes
Old 09-12-2022, 03:57 AM
NMC_EXP NMC_EXP is offline
Join Date: Jul 2010
Location: New Mexico
Posts: 321


You are very welcome.

For 5 years I worked o-ring problems. They were #3 on the corporate warranty list and kept me real busy.

Anyway, Parker Hannifin O-ring Division was a great supplier. Parker supplied a gadget to dealers called a "cone" and that is what it was. Drop an o-ring on the cone and you could read the approximate inside diameter.

As to the cross section diameter AS568 specified standard CS diameters. Rather than putting a caliper on the cross section and squeezing, I'd recommend setting the caliper to a certain gap then seeing if the o-ring will slide thru the gap. If not, open it up a few thou and try again until you get a little drag as it slides thru.

I'd be guessing on durometer hardness for this app. But I'd guess not very hard such as maybe 40 to 50 durometer. For frame of reference 90 durometer is hard as a rock.

As to material type: I'd recommend EPDM rubber but mostly you will find "Buna-N" aka nitrile rubber which will work.

If anyone has a Unertl parts list they may show a "dash size" for the o-rings. For example, "-072" or "dash 072". In that case you are home free as to size (I pulled the 072 number out of the air - don't mean nothing).

Like I said if I was still working I'd do a full analysis on sample o-rings for you and the rest of the Unertl world. I shoot a 20X Unertl on my 40XB samllbore rifle.

Good luck.
“After all is said and done, successful rifle shooting on the range is nothing more than first finding a rifle and lot of ammunition which will do precisely the same thing shot after shot, and then developing the same skill in the rifleman.” ~ Capt. E. C. Crossman (Book of the Springfield)
Reply With Quote
Old 01-05-2023, 02:11 PM
TokiWartooth TokiWartooth is offline
Join Date: Jan 2010
Location: New York
Posts: 3,403

Go to Harbor Freight and buy that plastic box of assorted 0-Rings
Reply With Quote
Old 01-05-2023, 03:48 PM
X Hunter X Hunter is offline
Join Date: Oct 2009
Posts: 1,441

If McMaster-Carr doesn't have it, you don't need it.
Reply With Quote
Old 01-13-2023, 10:12 AM
TW56 TW56 is offline
Join Date: May 2010
Location: Minnesota
Posts: 1,542

Originally Posted by TokiWartooth View Post
Go to Harbor Freight and buy that plastic box of assorted 0-Rings
TokiWartoth, it is good to see you posting again.
Feedback thread;
Reply With Quote

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

All times are GMT -5. The time now is 03:12 PM.