Go Back   CMP Forums > CMP Sales > Smallbore
Register FAQ Members List Calendar Mark Forums Read

 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #11  
Old 04-16-2021, 07:58 PM
nate nate is offline
 
Join Date: Feb 2010
Location: North Carolina
Posts: 272
Default

In case you don’t have the steps for removing and installing the bolt.
1. Lift up on the bolt handle
2. Put safety in fire position
3. Pull and hold the trigger with one hand, then push forward on the bolt release lever with the other hand
4. With the bolt release held all the way forward, release the trigger and slide the bolt out of the receiver.
To install.
1. With the safety in the fire position, pull and hold the trigger with one hand, then push and hold the bolt release forward. Release the trigger.
2. Make sure the bolt handle is in the normal open position and slide the bolt forward making sure the bolt body is aligned with the loading platform.
3. When the bolt has entered the loading port area, release the bolt release lever.
Don’t know if the sequence has anything to do with the problem you are having with the trigger but it may be possible. This is from the manual for the rifle.
Reply With Quote
 

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off



All times are GMT -5. The time now is 10:46 PM.