Go Back   CMP Forums > CMP Sales > M1 Garand
Register FAQ Members List Calendar Mark Forums Read

Reply
 
Thread Tools Display Modes
  #1  
Old 05-02-2021, 06:27 PM
adh2 adh2 is offline
 
Join Date: Sep 2010
Location: Tennessee
Posts: 73
Default 7mm Garand Poll

If you were to barrel a M1 in 7mm, would you choose 7x57 Mauser or 7mm-08?
Reply With Quote
  #2  
Old 05-02-2021, 06:41 PM
aloreman aloreman is offline
 
Join Date: Sep 2012
Location: Fl
Posts: 2,875
Default

7mm08
Reply With Quote
  #3  
Old 05-02-2021, 06:41 PM
Skeet6 Skeet6 is offline
GSM Master Instructor
 
Join Date: Oct 2009
Location: Pocono Mountains
Posts: 1,671
Default

7mm08
Mike B
__________________
CMP GSM Master Instructor
NRA Range Safety Officer
Still searching for WRA 1614856.
Reply With Quote
  #4  
Old 05-02-2021, 06:44 PM
BRMPCF50 BRMPCF50 is offline
 
Join Date: Dec 2013
Location: Central MO
Posts: 364
Default

7x57mm, simply because of ammo availability.
Reply With Quote
  #5  
Old 05-02-2021, 07:47 PM
mchusmc mchusmc is offline
 
Join Date: Dec 2013
Posts: 1
Default

7x57, because 7mm-08 isnít too much different than 7.62mm, and 7x57 is just a cool classic!
Reply With Quote
  #6  
Old 05-02-2021, 08:56 PM
bruce bruce is offline
 
Join Date: Nov 2009
Location: Georgia
Posts: 1,277
Default

I'd go with the 7mm-08. Short powder column helps with accuracy and compact case means high load density. Common head size means no problems w/ M-1 bolt face or extractor, especially given the normally larger groove on .308 type brass. JMHO. Sincerely. bruce.
__________________
<><
Reply With Quote
  #7  
Old 05-02-2021, 09:29 PM
Leonardski Leonardski is offline
 
Join Date: Dec 2019
Location: Pennís Woods (northcentral PA)
Posts: 124
Default

My vote is for 7mm-08. Lots of 7mm bullets for reloading. Ditto in the comparison to .308 cartridge characteristics. Plus, that is a standard hunting caliber in our household.


Sent from my iPad using Tapatalk
Reply With Quote
  #8  
Old 05-02-2021, 10:26 PM
jimthompson502002 jimthompson502002 is offline
 
Join Date: Nov 2009
Location: La Crosse, Wisconsin
Posts: 2,988
Default

Did it in 7x57. Same ballistics, easier round to find on the open market (albeit in the current lunatic propaganda environment, NOTHING is "easy to find"), way over a century of bullet and load data, and it's basically the same ballistics, albeit not quite as efficient.

Blarney to the contrary, the common case head Mauser derived before 1890 is the very reason so much current ammo, including all of these, the .30/06, .308. .45 A.C.P., 7.92x57 JSs, and so on--utilize the same span and approximate extractor setup. Yes, despite the hogwash to the contrary, every firearms designer on the planet knew all about it and had specimens. That's why the en bloc clips would be absolutely identical.

Mine was ridiculously accurate even before I bedded it.

It IS true that the .308 based former wildcat is very similar to Garand's .276 Pedersen Center Fire, which was truly the original M1 cartridge, and vastly more modern and efficient than the M1906 .30 caliber to which it was re-dedicated when the Army Chief of Staff insisted the new rifle be able to gobble up the millions of rounds of WWI-vintage ammo still in storage ca.1932.

Mine was done on a 7mm. heavy Douglas blank left over from some other project. By the way, the narrower bore automatically becomes a more stable/rigid barrel.

Last edited by jimthompson502002; 05-02-2021 at 10:33 PM.
Reply With Quote
  #9  
Old 05-02-2021, 10:26 PM
Ironsight01 Ironsight01 is offline
 
Join Date: Feb 2012
Location: MI
Posts: 47
Default

What about a .280 Remington a 30-06 necked down to 7mm.
Reply With Quote
  #10  
Old 05-03-2021, 12:15 PM
EvansvilleIHC EvansvilleIHC is offline
 
Join Date: Jun 2010
Location: Memphis, TN
Posts: 199
Default Not Sure

It looks to me like there is about 50/50 in terms of which would be the best. Seems to depend on previous experience. Very neat idea though.
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off



All times are GMT -5. The time now is 02:30 AM.