Go Back   CMP Forums > CMP Sales > M1 Garand
Register FAQ Members List Calendar Mark Forums Read

Reply
 
Thread Tools Display Modes
  #1  
Old 05-31-2021, 02:48 PM
Wineman Wineman is offline
 
Join Date: Oct 2009
Location: CA
Posts: 137
Default Barrel Wear

While cleaning this M1, I noticed that there is a wear area on the barrel to the right side of the chamber. This is approximately where the extractor path would be as the bolt opens and closes. There does not seem to be any contact or burrs on the extractor. The photo is not the best but the wear is about 1/4 of the barrel circumference. Note, the receiver does not have any park on it, someone wanted a deer rifle at one time. To get the rear sight back I used a 3/8" Weaver rail and a Tech-Sight TSR-200. I get about 2/3 MOA clicks from it.


Thanks,


Dave






Last edited by Wineman; 05-31-2021 at 03:16 PM.
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off



All times are GMT -5. The time now is 06:21 AM.