Go Back   CMP Forums > CMP Sales > CMP Bolt Action Rifles > Mann Accuracy Device
Register FAQ Members List Calendar Mark Forums Read

 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #1  
Old 08-01-2012, 01:40 AM
VMFn542bob VMFn542bob is offline
 
Join Date: Oct 2009
Location: Arizona
Posts: 1,066
Default LOST : MANNs, Men and Barrel Companies

LOST : MANNs, Men and Barrel Companies
I was up in Prescott Valley today visiting a gunsmith with a friend. He showed us two massive gun barrels he had purchased some time back for $25 each and he had determined both were chambered for 308 Winchester. Only one of the barrels had any marking on. It was stamped "H-S PRECISION" along with some other information. I took some pictures, made some measurements but I need to go back and take more of them.
The two barrels had the same length, were made of the same blued or parked steel. Both had the familiar MANN steps in barrel diameters but neither had a receiver. The threaded end of the barrels was different, one with a fine "V" thread and the other with a ACME thread a little coarser than the "V" thread. The chambers were also different. The mouth of one chamber was recessed for the extractor while the other was flat. Neither had a taper or feed ramp to the chamber leaving the sides of the cartridge fully supported.
-
,
-
Anyway, my friend and his gunsmith friend are both Arizona natives from Prescott and they began reminicing about how those barrels
had to have been made by Thomas Houghton's H&S Precision company. The company had moved away from Prescott many years
ago. I immediately recognized both of the barrels to be MANN Accuracy Device barrels. Prescott is also the home of Ruger and some
research on the web quickly revealed that at one time, there were many companies in Prescott engaged in making fine guns and gun
barrels. Ruger is the only one left. Along with Bill Rugers and Thomas Houghton other names quickly came to the surface : Bill Atkinson &
Ken Johnson. All knew each other and learned their craft from each other.
-
I have two MANN barrels with receivers purchased from the CMP. Both barrels are marked "WALKER". In Steven Rutledge's report to
Orest Michaels, he recognized some manufacturers names on the barrels he studied but did not recognize the name "WALKER".
I have so far had no success in locating this company and have come to believe the barrels were made by Remington. They most likely
were marked "WALKER" to honor Remington's long time foreman Merle "Mike Walker" who is now 100. Mike is known as the father of all
of Remington's bench rest rifles. I will write to Remington to see if this is true.
-
The art of making gun barrels is learned and taught and most of those who engage in this industry know each other.
I would like this thread to become a clearing house for the unknown MANNs.
If you find one post it here with some pictures and all the information you can gather on it. Eventually it can be identified.

Last edited by VMFn542bob; 08-16-2012 at 09:49 PM. Reason: updated photo collage
Reply With Quote
 

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off



All times are GMT -5. The time now is 12:26 PM.