Go Back   CMP Forums > CMP Sales > M1A/M14
Register FAQ Members List Calendar Mark Forums Read

Reply
 
Thread Tools Display Modes
  #1  
Old 04-20-2015, 01:42 PM
Moammo6 Moammo6 is offline
 
Join Date: Nov 2012
Location: Space Coast Florida
Posts: 264
Default SAI vs USGI Stock Shape & Dimensions

Probably a simple Q for the old M14 collector guys: Got an SAI M1A a while back, then ordered a surplus M14 stock for a couple of reasons: (1) keep the SAI stock "cherry", and (2) also to have a bit of the original stuff. The stocks are quite different in profile/dimensions, not even considering the selector switch cut-out. The USGI stock has quite a sharp comb and pistol grip, while SAI is much fatter and rounder. The other major difference is the mag well wood. The USGI I received is only about 3/16" thick on LH side vs. 3/8" for the RH side. The SAI is symetrically @ 3/8" on both sides. Comments for a newish M1A-M14 guy (did carry one for a couple of years in the mid-60s Army, but no recall of details) are welcome.
Reply With Quote
  #2  
Old 04-20-2015, 01:52 PM
tinydata tinydata is offline
 
Join Date: Jul 2012
Location: Jacksonville, FL
Posts: 383
Default

SAI gets their new-production stocks from Boyds. While they do produce a lot of stocks, Boyds is notorious for fat, oversized stocks with fit issues. For a while, Boyds Garand stocks were heavily looked down upon for those reasons.

As far as I know, USGI stocks will come in two profiles- the slimmer standard profile and the fatter "big red" birch stocks. The "big red" are still considerably skinnier than the SAI stocks.
__________________
"As the troops used to say, 'If the country is good enough to live in, itís good enough to fight for.' With privilege goes responsibility."

-Eugene B. Sledge
Reply With Quote
  #3  
Old 05-09-2015, 12:06 AM
KurtC KurtC is offline
 
Join Date: Dec 2012
Location: New Jersey
Posts: 321
Default

The current SAI stocks, made by Boyds, are medium weight. They are the same stocks used on National Match models, just without the bedding. They are similar in size to the USGI "big red" stocks that were used as replacements for the original issue ones, which were prone to warping and cracking.

Minelli, in Italy, makes a wood stock that is more trim than the Boyds yet is still stronger than the USGI.
Reply With Quote
  #4  
Old 05-09-2015, 03:35 PM
Sailormilan2 Sailormilan2 is offline
 
Join Date: Jul 2010
Location: Surrounded in Central CA
Posts: 686
Default

Over on the M14 forum, there is a thread showing the differences in the stocks by manufacturer. Each maker has subtle differences in their stocks.

http://m14forum.com/stock/165216-sub...tock-make.html
__________________
Admit nothing, deny everything, demand proof.
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off



All times are GMT -5. The time now is 11:45 PM.