Go Back   CMP Forums > CMP Sales > M1 Garand
Register FAQ Members List Calendar Mark Forums Read

 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #1  
Old 01-24-2021, 10:42 PM
krdomingue krdomingue is offline
 
Join Date: Nov 2015
Location: Katy, TX
Posts: 1,418
Default Barreled Receiver will not pass tilt test

Looking for advice before I give up and part it out.

I purchased an HRA barrel receiver in Feb 2016 from somebody on this form who had purchased it from the CMP years prior. It sat around for a while before I collected all the parts to put it together. After I finally got around to it, it will not pass the tilt test with the lower band installed. I have tried with a couple different lower bands including a brand new one off a CMP stock set. I have tried several different op-rods to include a couple off perfectly functioning rifles. I have also tried it will three different gas cylinders.

No lower band, it passes the tilt test. With lower band it fails.

I am hoping I am missing something obvious, but I am beginning to believe the barrel might be slightly bent.

Suggestions?

Last edited by krdomingue; 01-25-2021 at 02:00 PM.
 

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off



All times are GMT -5. The time now is 07:33 PM.